Parker 26 Series NPTF Pipe Crimp Fittings

Use with the following Parker Hose Series:

201, 206, 213, 221FR, 225, 244, 266, 285, 293, and SS23CG.

Parker 26 series fittings (hose ends) are engineered to work with select Parker transportation and refrigerant (AC) hoses. These hoses’ inside diameters (ID) are sized smaller than a typical hydraulic hose. The dash sizes of these hoses refer to a nominal hose ID size and not the actual size. For example, -4 size would normally designate a 1/4” ID but in this case, the actual ID is 3/16”.

Because fittings are sized to fit the hose ID, the 26 series fitting sizes for the hose end of the fitting are not the actual measurements but nominal size – just like the hose they are designed to work with. For example, 10126-2-4 fitting is 1/8” on the pipe thread end and 3/16” (nominal -4 size) on the hose end.

Confusing? Just remember to match the dash size of the fitting to the dash size of the hose.  Refer to our technical pages for more information on correct hose assembly selection and fabrication.

Parker 10126 Series Crimp Fitting

Male NPTF Pipe – Rigid

How to order: Visit any of our stores, call us, fax/e-mail us or use the form on this page (Fast Answers).   TIP:  The numbers after dashes in each part number tell you the size of each end of the fitting. The number after the first dash indicates the size of the thread, the number after the second dash indicates the size of the hose end.

Parker 26 Series JIC Crimp Fittings

Use with the following Parker Hose Series:

201, 206, 213, 221FR, 225, 244, 266, 285, 293, and SS23CG.

 Parker 26 series fittings (hose ends) are engineered to work with select Parker transportation and refrigerant (AC) hoses. These hoses’ inside diameters (ID) are sized smaller than a typical hydraulic hose. The dash sizes of these hoses refer to a nominal hose ID size and not the actual size. For example, -4 size would normally designate a 1/4” ID but in this case, the actual ID is 3/16”.

Because fittings are sized to fit the hose ID, the 26 series fitting sizes for the hose end of the fitting are not the actual measurements but nominal size – just like the hose they are designed to work with. For example, 10126-2-4 fitting is 1/8” on the pipe thread end and 3/16” (nominal -4 size) on the hose end.

Confusing? Just remember to match the dash size of the fitting to the dash size of the hose.  Refer to our technical pages for more information on correct hose assembly selection and fabrication.

Parker 10326 Crimp Fitting

Male JIC 37° - Rigid

For available sizes, refer to the table below.

Parker 10626 Crimp Fitting

Female JIC 37˚ - Swivel 

For available sizes, refer to the table below.

Parker 13726 Crimp Fitting

Female JIC 37˚ - Swivel - 45° Elbow - Short Drop

For available sizes, refer to the table below.

Part Number

Thread

Hose  ID

A

E

W

× Sản phẩm đang được cập nhật. SEALTECH VIETNAM GIỎ HÀNG Tổng tiền thanh toán: Giỏ hàng LANGUAGE FANPAGE Facebook HỖ TRỢ TRỰC TUYẾN HOTLINE ĐT: 0946 265 720 Email: info@sealtech.com.vn Ms. Nhi ĐT: 0913 914 018 Email: Mr. Long ĐT: 0918 834 615 Email: LƯỢT TRUY CẬP Đối tác Tên N?i dung abc Thương hiệu: | Mã sản phẩm: - + Thêm vào giỏ hàng Bạn đã thêm [] vào giỏ hàng Giỏ hàng của bạn có sản phẩm Sản phẩm Đơn giá Số lượng Thành tiền Tổng tiền thanh toán: Tiếp tục mua hàng Thực hiện thanh toán